返回首页

保定市太阳能信号灯厂

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
太阳能信号灯
添加时间:2018/1/18 15:43:32     浏览次数:
各项参数 Various parameters 编辑 edit 1、光源:光源采用φ10mm四元素超高亮度发光二极管(LED),使用寿命≥10万小时。 1, source: light source adopts four elements with 10mm ultra high brightness light-emitting diode (LED), the service life of more than 100 thousand hours. 2、LED角度:发光二极管角度在25-30°时光源饱满,使可视角度范围扩大; 2, LED angle: LED light source angle at 25-30 degrees full, to expand the scope of visual angle; 太阳能信号灯 Solar energy signal lamp 太阳能信号灯 Solar energy signal lamp 3、太阳能黄闪灯均采用单晶硅太阳能供电,蓄电池功率15W,电池充满电,可连续工作170个小时; 3, solar flashing lights are powered by monocrystalline silicon solar power, the battery power is 15W, the battery is full of electricity, and it can work for 170 hours continuously. 4、SG400-3-AS所含LED的管粒为120粒,增加使用寿命和发光亮度,有较强的视觉冲击感,提醒司机、行人注意前方有危险; 4, SG400-3-AS contains LED particles of 120 particles, increasing service life and luminous intensity, and has a strong sense of visual impact. It reminds drivers and pedestrians that there is danger ahead. 4、透光设计:透光镜片的外表面采用倾斜面设计,能防止透光镜片积累灰尘; 4, light transmittance design: the exterior surface of the transparent lens is designed by the inclined surface, which can prevent the light from accumulating dust. 5、外观设计:外观必须为LED光源所设计,结构为超薄化,灯具厚度(φ400mm透光面的灯具为150mm); 5, appearance design: the appearance must be designed for the LED light source, the structure is ultra thin, the lamp thickness (the lamp of phi 400mm translucent surface is 150mm); 6、外壳材料:外壳采用聚碳酸酯(PC)材料一次注塑成型,密封采用硅橡胶密封件,防尘、防水、阻燃、抗老化,灯具外壳使用寿命≥10年; 6, shell material: shell polycarbonate (PC) material is a plastic injection molding, sealed with silicone rubber seals, dust-proof, waterproof, flame retardant, anti aging, lamp shell service life more than 10 years;
上一页  可移动太阳能信号灯上岗   
下一页  无线连接太阳能信号灯日前在江城首次亮相
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3

Copyright © 技术支持:遨游网络

  • 联系我们
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3